Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.
- Installs onto 2-1/2 in. to 12 in. wide I-beam flange (6.3-30.5cm) up to 1-1/2" thick (3.8cm).
- Attach in any orientation or direction
- Compact and lightweight design
- High strength steel and aluminum construction
- Extremely rugged and corrosion resistant
- Swiveling D-ring tie-off point
- Detent style attachment with built-in tightening handle
Attachment Type Info Clamp Fits I-Beam Flange Width 2-1/2 to 12 in. (6.3-30.5cm) Install Type Reusable Capacity 310 lbs. (141 kg) ANSI / 420 lbs. (190 kg) OSHA Brand DBI-SALA® Size 2-1/2 in. to 12 in. wide (6.3-30.5cm) up to 1-1/2" thick (3.8cm) Velocity Ship Yes iSafe Equipped Yes Length 2-1/2 in. to 12 in. wide (6.3-30.5cm) up to 1-1/2" thick (3.8cm) Label Vinyl Fastener Stainless Steel and Zinc Plated Steel Detent Pin Stainless Steel Model 2108406 Physical Dimensions 20.00x2.50x4.00 (in) Physical Weight 5.30 lbs (2.4kg) Product Styles Fixed Product Types Anchors for Steel Standards OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.1
- Additional Information
Unit No Meets Standards No Dimensions No Contents No
Write Your Own Review
You're reviewing: DBI/Sala 2108406 Fixed Beam Anchor
- Instruction Manual