The Devcon Flexane 80 Liquid is a castable, non-shrinking, medium-viscosity (10,000 cps) urethane compound for making rugged, flexible molds, forming dies, cast parts, non-scratching holding fixtures and abrasion-and noise-resistant linings, as well as for encapsulating parts. Listed under NSN #8030-00-144-9756. Image displayed is of the 1 lb container, not for the 10 lb. container. For display purposes only.
Typical Physical Properties:
Coverage/lb 106 sq.in./lb. @ 1/4"
Cured Hardness 87A
Cured Shrinkage 0.0018 in./in.
Demolding Time 10 hrs.
Dielectric Strength 350 volts/mils
Functional Cure 16 hours
Maximum Elongation 650%
Maximum Operating Temperature Dry: 180°F; Wet: 120°F
Mix Ratio 77resin:23curing agent / wt.
Mixed Viscosity 10,000 cps
Percent Solids by Volume 100
Pot Life 30 min. @ 75°F
Specific Volume 26.5 in.(3)/lb.
Taber Abrasion (H-18, dry) 0.273 cc (1000g, 1000revs)
Tear Resistance 350 pli
Tensile Strength 2,100 psi
- Additional Information
Unit 10 lb. Container Country of Origin United States Dimensions No Contents No
Write Your Own Review
You're reviewing: Devcon 15810 Flexane 80 Liquid Medium Viscosity Urethane Compound, 10 lb.Container
- Technical Data Sheet
You may also be interested in the following product(s)
$409.99 As low as: $389.99
$177.99 As low as: $170.79
Starting at: $4.50
Starting at: $71.99