Features and Benefits: Washed in microprocessor controlled, two-in-one, washer/dryer laundering system to provide very low surface particulates, ionic extractables and non-volatile residues. Micro textured surface enhances wet or dry grip. Silicone-free. Multi-Class cleanroom compatibility. Provides superb aesthetics, dexterity, tactile sense, fit, feel and comfort. Hand specific design minimizes unnecessary stress and strain that can cause musculoskeletal injury over time Irradiation indicators are placed on all master poly-bags and cartons – your guarantee of sterility assurance. Hand Specific, curved fingers, bisque finish (SH2) and beaded cuff.
Sterilization Method Gamma Sterilization. Certififed sterile at a minimum dosage of 25 Kgy. Particle Count max. 1,500/cm² Trace Elements(Br) Bromide:(Ca) Calcium:(Cl) Chloride:(F) Fluoride:(Mg2) Magnesium:(NO3) Nitrate:(PO4) Phosphate:(K) Potassium:(Na) Sodium:(SO4) Sulfate:not detectable2.00 µg/cm²5.00 µg/cm²not detectablenot detectable0.25 µg/cm²not detectable0.50 µg/cm²0.25 µg/cm²0.10 µg/cm² FTIR Silicone oil, Amide, DOP (Tested in accordance to IEST-RP-CC-005.3) are non detectable Non-Volatile Residue max. 30 mg/g. (Tested in accordance to IEST-RP-CC-005.3) Surface Resistivity max. 1 x 10¹¹ ohms/square Static Decay max. 3 seconds Length (mm) 290 Palm Width (mm) 95 ± 5 Palm Thickness (mm) 0.12 Finger Thickness (mm) 0.12 Cuff Thickness (mm) 0.10 Tensile Strength (MPa) min. 20 Ultimate Elongation (%) min. 500 Certificate of Analysis A certificate of analysis is available upon request to ensure all products shipped conform to specified specifications. Quality Assurance Manufactured under ISO 9001 Quality System.
- Additional Information
Unit 200/Case Meets Standards No Mil Thickness 5 Mil Glove Length 12 in. Clean Room Rating Class 10 Compatible Electrostatic Dissipative No Dimensions No Contents No
Write Your Own Review
You're reviewing: Microflex HSCE4-899 Sterile Clean Room 12" Nitrile Gloves, Hand Specific, 200/Case