DBI/Sala Anchorage Connectors
7 Item(s)
List Grid
-
DBI/Sala 2100050 Concrete Anchor Strap
$9.97 As low as: $8.25- 5000 lb minimum tensile strength
- 3 1/2' length
- Meets or exceeds all applicable OSHA requirements and ANSI standards, including ANSI Z359
-
DBI/Sala 2104560 Concrete D-Ring Anchor
$98.60 As low as: $82.75- Installs with standard drill bits, 11/16", 18 mm or 3/4".
- Rated 5000 lbs.
- Connection point swivels 360 degrees for safety and ease of use.
- Meets or exceeds all applicable industry standards including OSHA, ANSI and ASTM E488 Standard Test Methods for Strength of Anchors.
-
DBI/Sala 2101630 D-Ring with Anchorage Plate
$36.87 As low as: $32.45- Minimum breaking strength is 5000 lbs.
- 1/4" H x 2" W x 4 1/4" L
- Meets or exceeds all applicable industry standards including OSHA, ANSI, and the stringent ANSI Z359
-
DBI/Sala Tie-Off Adapters
Starting at: $45.19
- Standard adapter has 1 3/4" polyester strap
- 5000 lb minimum tensile strength
- Meets or exceeds all applicable OSHA and ANSI standards including ANSI Z359
-
DBI/Sala Carabiners
Starting at: $47.85
- Steel Construction
- Meets or exceeds OSHA and ANSI standards including ANSI Z359-2007 for 3600 lb gate.
-
DBI/Sala 2104700 Glyder2 Sliding Beam Anchorage System
$222.74 As low as: $199.89- 5000 lb minimum tensile strength
- Glyder2 requires no pins and fist 3 1/2" to 14" wide flange up to 1 1/4" thick.
- Replaceable wear pads
- Meets or exceeds all applicable industry standards, including OSHA, ANSI and the stringent ANSI Z359
-
DBI/Sala 2108406 Fixed Beam Anchor
$396.52 As low as: $353.99- Fits Flanges up to 1 1/2" thick and up to 12" wide.
- Rated 5000 lbs minimum strength in any direction.
- Meets or exceeds all applicable OSHA requirements and ANSI standards including ANSI Z359
7 Item(s)
List Grid
