Anchorage Connectors
-
Miller 8183-6FTGN 6 Foot Cross-Arm Strap
$41.27 As low as: $37.95- Capacity: 400 lbs maximum
- Length: 6 ft
- Webbing: 2" Polyester webbing
- D-Rings: Steel; 2" and 3" diameter
-
DBI/Sala 2100050 Concrete Anchor Strap
$9.97 As low as: $8.25- 5000 lb minimum tensile strength
- 3 1/2' length
- Meets or exceeds all applicable OSHA requirements and ANSI standards, including ANSI Z359
-
DBI/Sala 2104560 Concrete D-Ring Anchor
$98.60 As low as: $82.75- Installs with standard drill bits, 11/16", 18 mm or 3/4".
- Rated 5000 lbs.
- Connection point swivels 360 degrees for safety and ease of use.
- Meets or exceeds all applicable industry standards including OSHA, ANSI and ASTM E488 Standard Test Methods for Strength of Anchors.
-
DBI/Sala 2101630 D-Ring with Anchorage Plate
$36.87 As low as: $32.45- Minimum breaking strength is 5000 lbs.
- 1/4" H x 2" W x 4 1/4" L
- Meets or exceeds all applicable industry standards including OSHA, ANSI, and the stringent ANSI Z359
-
DBI/Sala Tie-Off Adapters
Starting at: $45.19
- Standard adapter has 1 3/4" polyester strap
- 5000 lb minimum tensile strength
- Meets or exceeds all applicable OSHA and ANSI standards including ANSI Z359
-
DBI/Sala Carabiners
Starting at: $47.85
- Steel Construction
- Meets or exceeds OSHA and ANSI standards including ANSI Z359-2007 for 3600 lb gate.
-
Miller Permanent Roof Anchors
Starting at: $27.25
- Single or Double D-Rings
- Supplied with eight nails
- Stainless steel
-
Miller 17D1 Steel Twist Lock Carabiner, 1" Gate Opening
$34.37 As low as: $32.10- 1" (25mm) Gate Opening
- 400 lbs Maximum Capacity
- Meets or exceeds OSHA 1926.502, ANSI Z359-2007 and CSA Z259.12 requirements.
-
MSA 505282 Anchorage Connector Strap, 5'
$36.29 As low as: $33.09- D-ring on one end, loop on the other
- 5' length (other lengths available)
- Meets OSHA and ANSI standards
-
Miller Titan T7314-6FTAF Anchorage Connector, 6'
$27.27 As low as: $25.45- 1 3/4" webbing for great strength
- 6' length
- Compliments protection systems
