Double Insulated Electrical Tool Kits for Electrical Workers

Insulated electrical tools became essential as a result of electrical safety related work practice 1910.3310.33 OSHA standards to safeguard personnel as well as equipment that is susceptible to shorting out and creating spiking surges to electronic apparatuses. Compliance with these standards will reduce the number of electrical accidents resulting from unsafe work practices by employees. OSHA has enacted laws making it mandatory for the electrical industry to develop and implement safety procedures, provide safety equipment, and train employees who are exposed to 50 volts or more to ground. Every insulated hand tool OEL manufactures and we sell is rated for exposure up to 1,000VAC and di-electrically tested at 10,000VAC. These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools. These tools are necessary for compliance with OSHA 1910.333 (c)(2), and NFPA 70E 2015. The insulating material used is impact resistant and flame retardant. Two-color insulation makes inspection easier which adds to the overall safety. If the yellow under layer is showing, the tool may no longer be insulated properly and should be considered for replacement and removed from service in the field.

Features of our Insulated Tool Kits:

  • Tested to 10,000VAC And Rated for 1000VAC Maximum Exposure
  • Helps Meet OSHA Requirement 29 CRF Part 1910.331-33S
  • Meets NFPA 70E Requirement
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Meets IEC 900 Standard for Insulated Hand Tools

Our best-selling 10000VAC Double Insulated Toolkits include OEL Insulated 9 Piece Electricians Tool Kit, OEL Insulated 5 Piece Battery Torque Set, OEL Insulated Hex Wrench Set, 14 Piece and OEL BBK Big Box Premier 60 Piece Insulated Tool Kit.

19 Products found
Result 1- 19 of 19
# 2610214

Includes:

  • 1/16” Type L Long Arm Wrench
  • 5/64” Type L Long Arm Wrench
  • 3/32” Type L Long Arm Wrench
  • 7/64” Type L Long Arm Wrench
  • 1/8” Type L Long Arm Wrench
  • 9/64” Type L Long Arm Wrench
  • 5/32” Type L Long Arm Wrench
  • 3/16” Type L Long Arm Wrench
  • 7/32” Type L Long Arm Wrench
  • 1/4” Type L Long Arm Wrench
  • 5/16” Type L Long Arm Wrench
  • 3/8” Type L Long Arm Wrench
  • 7/16” Type L Long Arm Wrench
  • 1/2” Type L Long Arm Wrench
  • Tool Pouch

Manufactured for use in compliance with:

  • Meets IEC 900 Standard for Insulated Hand Tools
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335
  • Subpart S; 29 CFR Part 1910.269 Subpart K
  • Meets NFPA 70E Requirement
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Impact Resistant and Flame Retardant


# 241814-B

  • 8 piece double insulated box end wrench set - Metric
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC


# 241713

  • 11 piece double insulated box end wrench set
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC


# 241708-B

Insulated wrench set includes:

  • 3/8" - 13/16" wrenches
  • Comes is a tool case


# 24RBM-8

  • 8 piece double insulated metric wrench set
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC


# 24RB-8

  • 8 piece double insulated wrench set
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC


# IMBK

  • 40 piece double insulated inside maintenance kit
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC
  • Made in the USA


# 262344

  • 11 piece double insulated hex wrench set
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC
  • Made in the USA


# 2613P

  • 13 piece double insulated hex wrench set
  • Meets or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC
  • Made in the USA


# 241714


  • 11 piece double insulated open end wrench set
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC
  • Made in the USA


# 241708-O

8 piece wrench set kit Includes:

  • 3/8" - 13/16" wrenches
  • Comes in a tool case
  • Free Shipping!


# SOCKET3

  • 11 piece double insulated socket set
  • Meet or exceeds ASTM F1505-01 & IEC 900 Standards
  • Dielectrically tested at 10,000VAC
  • Made in the USA


# MTK

Kit includes the following insulated tools:

  • 1/8" x 3" Cabinet Tip Slotted Screwdriver
  • 3/16" x 4" Square Blade Slotted Screwdriver
  • 1/4" x 7" Round Blade Slotted Screwdriver
  • #1 x 3" & #2 x 4" Phillips Screwdriver
  • 3/8" Drive, 11.5" Longer, 30-250 in/lb Torque Wrench
  • 3/8" Drive 8" Ratchet
  • 3/8 Drive 6" & 8" Flare End Extensions
  • 8 Piece Socket Set, Deep - 3/8 Drive, 12 Point - 3/8" through 13/16"
  • 8 Piece Box End Wrench Set - 3/8" through 13/16"
  • 7" Heavy Duty Diagonal Pliers
  • 7" Needle Nose Pliers with Cutter
  • 9" Linesman Pliers
  • Flashlight
  • Case

Manufactured for use in compliance with:

  • Meets IEC 900 Standard for Insulated Hand Tools 
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335
  • Subpart S; 29 CFR Part 1910.269 Subpart K
  • Meets NFPA 70E Requirement
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Impact Resistant and Flame Retardant


# ISHBS

Kit Includes:

  • 3/8" Ratchet
  • 3" & 6" Extensions 3/8" Dr
  • 3/8" Hex Bit Sockets - 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 & 3/8"
  • 3/8" Square Drive 12 pt Deep Sockets - 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 & 7/8"
  • Comes is a plastic tool case


# ETK

Kit Includes:

  • 9" Lineman's Pliers
  • 7" Diagonal Cutting Pliers
  • 7" Needle Nose Pliers
  • 1/8" x 3", 3/16" x 4", 1/4" x 7" Slotted Screwdrivers
  • #1 x 3", #2 x 4" Phillips Screwdrivers 
  • Insulated Ratchet, 10", 1/2" Drive
  • 1/2" Drive 5" Extension
  • 1/2" Drive 10" Extension
  • 7 Pcs - 3/8" through 3/4" - 1/2 Drive Standard Sockets 12 Pt
  • Comes is a plastic tool case

Manufactured for use in compliance with:

  • Meets IEC 900 Standard for Insulated Hand Tools
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335
  • Subpart S; 29 CFR Part 1910.269 Subpart K
  • Meets NFPA 70E Requirement
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Impact Resistant and Flame Retardant


# ERK

  • Meet or exceeds ASTM 1505-01 & IEC 900 Standards
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335


# BBK

Kit Includes the following insulated tools:

  • 1/8 x 3"; 1/16 x 4"; 3/16 x 6"; 1/4 x 7"; 5/16 x 6" Square Blade Slotted Screwdrivers
  • 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2" 3" Long Nut Drivers
  • #2 X 4" and #2 x 8" Phillips Screwdriver
  • Torque wrench - 3/8" Drive, 11.5" Long, 50-250 in/lb
  • Ratchet 3/8" Drive 8"
  • 3" and 6" Extensions, 3/8 Drive
  • 10 piece 5/16 to 7/8" 3/8 Drive Socket Set, 12 Point
  • Box end wrench set - 11 pieces 3/8" to 1"
  • Hex wrench type "L" Set, Long Arm - 14 pieces 1/16" to 1/2"
  • 7" Heavy Duty Diagonal Cutting Plier
  • 7" Needle Nose Plier with Cutter
  • 9" Linesman's Plier
  • 9-1/2" Cable Cutters
  • 10" Tongue and Groove Plier
  • Electrician's Combo Stripper/Cutter/Crimper Plier
  • Tool Pouch

Manufactured for use in compliance with:

  • Meets IEC 900 Standard for Insulated Hand Tools 
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335
  • Subpart S; 29 CFR Part 1910.269 Subpart K
  • Meets NFPA 70E Requirement
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Impact Resistant and Flame Retardant


# BATK5

Kit Includes:

  • 3/8" Drive Torque Ratchet 11.5" Long 50-250"/lb
  • 6" 3/8" Drive Flared Extension
  • 1/2" Ratcheting Box Wrench
  • 10mm" 3/8" Drive Deep Socket 12 pt.
  • 13mm" 3/8" Drive Deep Socket 12 pt.
  • Comes in a plastic tool case

Manufactured for use in compliance with:

  • Meets IEC 900 Standard for Insulated Hand Tools
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335
  • Subpart S; 29 CFR Part 1910.269 Subpart K
  • Meets NFPA 70E Requirement
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Impact Resistant and Flame Retardant


# BATK

Kit Includes:

  • 3/8" Square Drive Torque Ratchet 11.5" Long 50-250"/lb
  • 6" 3/8" Drive Flared Extension
  • 1/2" Ratcheting Box Wrench
  • 1/2" 3/8" Drive Socket 12 pt.
  • Comes in a plastic tool case

Manufactured for use in compliance with:

  • Meets IEC 900 Standard for Insulated Hand Tools
  • Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
  • Helps meet OSHA Requirements 29 CFR Part 1910.331-335
  • Subpart S; 29 CFR Part 1910.269 Subpart K
  • Meets NFPA 70E Requirement
  • Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
  • Impact Resistant and Flame Retardant


?