Drain Covers and Drain Seals

19 Products found
Result 1- 19 of 19
Multiple Options

  • Ultra-DrainGuards remove waste from stormwater before it can become a problem in the water system.
  • Exceeds 80% sediment removal efficiency
  • Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
  • Great for Industrial facilities, Construction sties, and more!
  • Measure 48"L x 36"W x 18"H


Multiple Options

  • Low maintenance!
  • Includes bypass port to prevent ponding and flooding
  • Quick and easy installation
  • Low profile design - unobtrusive to traffic & personnel
  • Compliance:  40 CFR 122.26


Multiple Options

  • Low maintenance!
  • Quick and easy installation
  • Low profile design - unobtrusive to traffic & personnel
  • Compliance: 40 CFR 122.26


Multiple Options

  • For curb inlets with high-flow volumes
  • Modular, 3-foot inner frames allow for compact transport and storage
  • Counterweight inserts into inlet to keep unit upright & secure (weights sold separately - Part #9148)
  • Tie-back straps on either end of unit can be used with sod pin or stake
  • Reusable after cleaning


Multiple Options

  • Made of 100% recycled materials
  • Can be reused - remove, clean and store until needed again
  • Built-in overflow ports allow water to pass through during rainfall events
  • No stakes, weights or hardware required.
  • Place in front of curb inlet assuring at least a 12" overlap on each side
  • Helps comply with NPDES, 40 CFR 122.26 (1999)


Multiple Options

  • Tapered design that wedges securely into standard drains
  • Eyebolts are removable, allowing installation of grating with DrainPlug still in place
  • Non-absorbing - easily cleaned for repeated use
  • Flexible polyurethane material - resists ooil, water and most aggressive chemicals


Multiple Options

    • Made of a rugged polypropylene that can be easily rinsed and reused
    • Has a deep accumulation pocket (36") that can hold up to 500 lbs of sand, soil and sediment
    • Designed for easy removal with backhoe, forklift and other equipment
    • Helps comply with NPDES, 40 CFR 122.26 (1999).


Multiple Options

  • Drain guards for use with combination catch basins with a street grate & curb opening
  • Stops sediment and other contaminants from entering curb portion of storm drain with heavy duty tension rods
  • Fits grate sizes up to 40" x 40"


Multiple Options

  • Set of 2 heavy duty coated steel retainers that mount on the inside ledge of the catch basin
  • This secures the DrainGuard when grating is removed or installed
  • 2 sizes to choose from
  • For use with all UltraTech DrainGuards


Multiple Options

  • Ultra-DrainGuards remove waste from stormwater before it can become a problem in the water system.
  • Exceeds 80% sediment removal efficiency
  • Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.


Multiple Options

  • Quick and easy installation
  • Modular design - build to any length
  • Units can be quickly connected to form longer lengths
  • Wedge shaped, heavy duty foam secures the unit in the curb inlet
  • Polypro material provides high-flow rate - will not cause ponding or flooding
  • Helps comply with NPDES, 40 CFR 122.26 (1999)
  • Feature a 456GPM Flow rate (per 3 foot section - when new)


Multiple Options

  • For use in drains with curb inlets only
  • Features 2 heavy-duty tension rods to keep the unit secured inside inlet for clean, flush-mounted installation
  • X-Tex filtering material is quickly and easily replaced
  • Different sizes available plus replacement filters!


Multiple Options

  • For use with flat grate catch basins
  • Allows run-off to flow through while blocking sediments
  • Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans


Multiple Options

  • For use with flat grate catch basins
  • Allows run-off to flow through while blocking sediments and/or catching oil
  • Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans


# 9378

  • Made of 100% recycled Ultra-Filter-Tex material
  • A superior water flow rate (151 gal/ft.2), together with built-in overflow ports prevent ponding and flooding
  • X-Tex material captures silt and sediment from runoff in addition to absorbing hydrocarbons
  • Quick & easy installation
  • Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements
  • Dimensions:  48"L x 36"W x 18"H
  • Performance - Oil up to 1.26 gallons, Sediment up to 40 lbs


# 9376

  • Has the same sediment and hydrocarbon removal capabilities as the Ultra DrainGuard, with additional bacteria reducing properties
  • Regulations: 40 CFR 122.26
  • Patented antimicrobial nanostructure kills single cell organisms such as bacteria, fungi, yeast and algae
  • 48"L x 36"W x 38"H
  • Performance:  Oil up to 1.57 gallons, Sediment up to 40 lbs


# 8306

  • Tarp size 10' x 10'
  • Absorbs up to 12 gallons
  • Use under machinery to catch leaks during repairs or general maintenance
  • Rolls or folds into small package - store easily in vehicles
  • Helps comply with NPDES, 40 CFR 122.26 (1999)


# 9208

  • 3 7/8' diameter
  • 25 NO DUMPING markers and adhesive
  • Help inform the public that most storm drains go into waterways
  • Quick & Easy to install using permanent adhesive
  • Designed with heavy duty plastic for long life.  Scratch resistant.


# 8305

  • Tarp size 5' x 5'
  • Absorbs up to 3 gallons
  • Use under machinery to catch leaks during repairs or general maintenance
  • Rolls or folds into small package - store easily in vehicles
  • Helps comply with NPDES, 40 CFR 122.26 (1999)


?