Browse and buy from several different ANSI class 3 hi-vis vests. We offer a variety of ANSI class 3 safety vests that comply with ANSI class 3 regulations that require the vest to have a minimum amount of high visibility and reflective material, therefore ANSI class 3 safety vests have shorts sleeves.

14 Products found
Result 1- 14 of 14
Multiple Options

A Critical Tool EXCLUSIVE!  In Stock and Ready to Ship!

  • ANSI Type R Class 3 Compliant
  • Rugged Front Zipper
  • Two-Tone DOT Compliant Striping for Enhanced Safety
  • Breathable Mesh Fabric
  • 5 Solid Fabric pockets
  • Sturdy Radio Mic Tabs
  • Generously Sized to fit over clothing
  • Sizes Medium through 5XL


Multiple Options

  • Sizes – Small – 5X-Large
  • Color – Lime with 2” Silver and 4” Orange Reflective Striping in a Suspender Pattern Over Top of Shoulders and a 360˚ Continuous Reflective Band Encircling the Torso
  • Material – 100% Polyester
  • Class – 3
  • Pockets – 6
  • Closure Style – Zipper Front
  • Meets – ANSI/ISEA 107-2015, Class 3


Multiple Options

The Portwest high visibility range is fully certified and tested to the ANSI/ISEA 107 standards, ideal for those who will not compromise on style, comfort, protection and performance. These garments are designed to keep you warm, dry and visible in all conditions.

  • Sizes – Small – 6X-Large
  • Color – Yellow with 2” Silver and 3” Orange Reflective Striping
  • Material – 100% Polyester Mesh 3 oz
  • Class – 3
  • Pockets – 4
  • Mic Tabs – 2
  • Closure Style – Zipper Front
  • 5-Point Breakaway (side and Shoulder Seams, Center Front)
  • Meets - ANSI/ISEA 107-2015 Type R Class 3


Multiple Options

  • Sizes – Medium – 5X-Large
  • Color – Lime with 2” Silver and 4” Orange Reflective Striping in a Suspender Pattern Over Top of Shoulders as Well as 360˚ Continuous Reflective Band Encircling the Torso
  • Material – 100% Polyester
  • Class – 3
  • Pockets – 6
  • Mic Tabs – 2
  • Closure Style – Zipper Front
  • Self-Extinguishing Properties will Diminish with Washing
  • Should Never be Used Where an Arc Flash or Flash Fire Hazard is Present
  • Meets –
    • ANSI/ISEA 107-2015 Class 3 Standards
    • ASTM D6413


Multiple Options

  • Sizes - Medium - 4X-Large
  • Color - Lime with 2" Silver Reflective Striping in Suspender Pattern Over Top of Shoulders as Well as 360˚ Continuous Reflective Bands Encircling the Torso
  • Material - 100% Polyester
  • Class - 3
  • Pockets - 5
  • Closure Style – Velcro
  • Self-Extinguishing Properties will Diminish with Washing
  • Item Should Never be Used Where an Arc Flash or Flash Fire Hazard is Present
  • Meets - 
    • ANSI/ISEA 107-2015 Class 3 Standards
    • ASTM D6413


Multiple Options

  • Sizes - Medium - 4X-Large
  • Color - Orange with 2" Silver Reflective Striping in Suspender Pattern Over Top of Shoulders as Well as 360˚ Continuous Reflective Bands Encircling the Torso
  • Material - 100% Polyester
  • Class - 3
  • Pockets - 5
  • Closure Style – Hook and Loop
  • Self-Extinguishing Properties will Diminish with Washing
  • Item Should Never be Used Where an Arc Flash or Flash Fire Hazard is Present
  • Meets - 
    • ANSI/ISEA 107-2015 Class 3 Standards
    • ASTM D6413


Multiple Options

  • Sizes - Small - 5X-Large
  • Color - Lime with 3M™ 2" Silver Reflective Striping in Suspender Pattern Over Top of Shoulders as Well as 360˚ Continuous Reflective Bands Encircling the Torso
  • Material - 90% Cotton, 10% Polyester Flame Resistant Fabric
  • Class - 3
  • Pockets - 3
  • Mic Tabs - 2
  • Closure Style - Zipper Front
  • Meets - 
    • ANSI/ISEA 107-2015 Class 3 Standards
    • NFPA 70E-2015
    • UL MH60361
    • Arc Rating 9.5 ATPV, Cat 2


Multiple Options

  • Sizes – Small – 5X-Large
  • Color – Orange with 2” Silver and 4” Lime Reflective Striping in a Suspender Pattern Over Top of Shoulders and a 360˚ Continuous Reflective Band Encircling the Torso
  • Material – 100% Polyester
  • Class 3
  • Pockets – 6
  • Closure Style – Zipper Front
  • Meets – ANSI/ISEA 107-2015, Class 3


Multiple Options

Whether you are working near moving vehicles or with heavy machinery, our NiteGlo™ series safety clothing with NiteGlo™ reflective piping and materials will give you high visibility by day and will look illuminated by night.

  • Sizes: Medium - 4X-Large
  • Hi-Vis Lime Polyester Mesh Fabric with NiteGlo Reflective Binding
  • 2” Silver Reflective Tape of 4” Orange Fabric
  • Class 3, ANSI/ISEA 107-2015
  • Zipper Front Closure
  • 6 Pockets - 2 Inside Pockets, 2 Outside Lower Pockets with Grommets & Flaps with tabs, 1 Outside Upper Left Chest Pocket, 1 Outside Upper Right Chest Pocket
  • 2 Radio Clip Holders, 4 Grommet Holes and a Clear ID Badge Holder


Multiple Options

Whether you are working near moving vehicles or with heavy machinery, our NiteGlo™ series safety clothing with NiteGlo™ reflective piping and materials will give you high visibility by day and will look illuminated by night.

  • Sizes: Medium - 4X-Large
  • Hi-Vis Orange Polyester Mesh Fabric with NiteGlo Reflective Binding
  • 2” Silver Reflective Tape of 4” Lime Fabric
  • Class 3, ANSI/ISEA 107-2015
  • Zipper Front Closure
  • 6 Pockets - 2 Inside Pockets, 2 Outside Lower Pockets with Grommets & Flaps with tabs, 1 Outside Upper Left Chest Pocket, 1 Outside Upper Right Chest Pocket
  • 2 Radio Clip Holders, 4 Grommet Holes and a Clear ID Badge Holder


Multiple Options

  • Sizes – Small – 3X-Large
  • Color – Lime with 2" Silver and 4" Orange Reflective Striping
  • ANSI Class – 3
  • Material – 100% Polyester Solid Knit Front and 100% Polyester Mesh Back
  • Pockets – 7
  • Mic Tabs – 2
  • Closure Style – Zipper Front
  • Meets – ANSI/ISEA 107-2015 Type R Class 3


Multiple Options

  • Sizes – Medium – 5X-Large
  • Color – Yellow with 2” Silver Flame Resistant Reflective Striping and 3” Orange Contrasting Striping
  • ANSI Class – 3
  • Material – Modaflame Knit, 5.5 oz
  • Pockets – 1
  • Closure Style – Hook and Loop
  • ARC1
  • Meets –
    • NFPA 70E
    • ASTM F1506-10A
    • ASTM F1959/F1959M-12 ATPV 5.1 CAL/CM2 (HAF 69%)
    • ANSI/ISEA 107-2015 Type R Class 3
  • Click Here for this Product’s Size Chart


Multiple Options

Radians Modacrylic FR safety vest is perfect when ultimate safety is required. Not only do these safety vests offer the flame-resistant properties required by ANSI 107-2015, but also certified background and reflective material. They are perfect for the Utility Industry, or anywhere ultimate safety is required.

  • Sizes - Medium - 5X-Large
  • Color - Green with 2" 3M™ Scotchlite FR Reflective Striping
  • Material - 88% Modacrylic & 12% Kevlar, 6.2 oz
  • Class - 3
  • Pockets - 2
  • Closure Style - Hook and Loop
  • Arc Rating - 5.1 Cal/CM2
  • D-Ring Slot
  • 50 Wash Max
  • Made in the USA
  • Meets - 
    • ANSI 107-2015 Level 2
    • ASTM F1506


Multiple Options

This COR-BRITE™ Type R, Class 3 safety vest is constructed of lime, mesh, self-extinguishing fabric. It features a five-point, breakaway design, two-tone contrasting tape, and hook & loop closure. It provides a clear badge holder, dual mic tabs, and pockets. Class 3-rated vests offer greater visibility to workers in complex backgrounds and through a full-range of body movements.

  • Sizes – Small – 5X-Large
  • Color – Lime with 2" Silver and 3" Orange Contrasting Striping
  • ANSI Class – 3
  • Material – Mesh
  • Pockets – 4
  • Mic Tabs – 2
  • Closure Style – Hook and Loop
  • 5-Point Breakaway
  • Clear Badge Holder
  • Meets – 
    • ANSI/ISEA 107-2015 Type R Class 3
    • NFPA 701


Our selection of ANSI class 3 hi-vis safety vests come in a variety of sizes, colors and styles. Styles include surveyor, breakaway, fire resistant and short sleeve. These class 3 vests come in an assortment of colors such as, yellow, green, orange and lime. The silver reflective tape increases visibility in low light conditions, while the fluorescent background will help you stand out. We also offer a wide variety of sizes, ranging from small to 6x-large.

At Critical Tool we offer ANSI class 3 hi-vis vests that permit optimum conspicuity and visibility for persons exposed to high vehicle speeds and / or reduced sight distances. The wearer must be able to be seen through a full range of body movements at a minimum distance of 1,280 feet and must be identifiable as a person. Examples of people who would use ANSI class 3 safety vests may include flaggers, road construction crews, DOT crews, utility workers, survey crews, airport ground crews, law enforcement, railway workers, school crossing guardsand toll gate personnel among others who need to follow safety standards. Shop our inventory of ANSI class 3 hi-vis vests from Ironwear, Portwest, Radians and Seco, trusted brands in meeting the American National Standards Institute class 3 guidelines.

Criticaltool.com offers both domestic and imported manufacturers of ANSI class 3 hi-vis vests providing you with a selection of value priced and high-end quality ANSI class 3 safety vests. Looking for a fast-custom logo printing or large quantity quote? Call 800-511-5652 or use the links below. Let us provide you with a fast, free quote on exactly the type of ANSI class 3 hi-vis vest you require.

Our bestselling ANSI class 3 hi-vis vests include the Ironwear 1293-LZ, 1293FR and 1256FR, Portwest US382 and Cordova VB3201FR.

View our complete inventory of our ANSI class 3 hi-vis vests below.

?